GPX "Snapshot+" 35mm Film Camera, CMF355BW

HOW DO I LOAD A NEW ROLL OF FILM?

1. Slide the lock latch on the side of the camera to open the back door. Make sure the film counter indicates “S” before loading new film roll.
2. Lift up on the film rewind knob and place a new roll of 35 mm film into the film chamber with the film leader tab at the bottom.
3. Push the rewind knob back into place.
4. Pull the film leader tab just enough to hook the 2nd hole onto the film take up spool.
5. Follow steps 4 and 5 from the First Use sections to finish.

A step by step instructional video can be found on our YouTube channel here: GPX Snapshot+ Instructional Video

HOW DO I REMOVE A FINISHED FILM ROLL?

Remove Pre-Loaded Film NOTE: Do not open the back door of the camera until the film is completely rewound into the film canister.

1. Press the film rewind button (on camera bottom).
2. Lift the handle on the rewind knob on the top of the camera and turn clockwise until all of the film has rewound back into the canister and you no longer feel resistance.
3. Slide the latch on the side of the camera and open the back door.
4. Lift up the film rewind knob to remove the roll of film.
5. Keep the film canister away from light until you develop the film

A step by step instructional video can be found on our YouTube channel here: GPX Snapshot+ Instructional Video