How far can the drone fly?
Up to 328 feet (100 meters) using Wi-Fi or the remote control.
How long does the battery last?
About 6–8 minutes per full charge.
How long does it take to charge?
Approximately 70–90 minutes.
How do I attach rotor guards and legs?
Use the provided screws and screwdriver for rotor guards; snap or screw legs onto the underside as shown in the manual.
What batteries does the remote use?
4 × AA batteries (not included).
How do I pair the drone with the remote?
Power on the drone, place it on a flat surface, turn on the remote, push the left stick fully forward and back until you hear two chimes.
My drone drifts—how do I fix this?
Use the trim buttons on the remote to counter drift. Reset trim if needed.
What is Headless Mode?
In Headless Mode, the drone moves relative to your control stick direction, regardless of where its front is pointing.
How do I perform a flip?
Press the 360° Flip button—ensure at least 9–10 feet of space in all directions.
How do I recalibrate the gyroscope?
Place the drone on a flat surface, link it to the remote, and pull both sticks down and to the right for 2–3 seconds until the lights flash.
Can I charge the battery while it’s in the drone?
Remove the battery before charging for safety.
Can I leave it charging overnight?
No—never leave the battery charging unattended or overnight.
How will I know it’s fully charged?
The charging cable’s red light will turn off when charging is complete.
What app do I need?
Sky Rider Cruise (available in Apple App Store and Google Play).
How do I connect to the Wi-Fi camera?
Turn on the drone, enable your phone’s Wi-Fi, connect to “Sky Rider Cruisexxx,” then open the app.
Can I use the app and remote together?
Yes—connect the remote to the drone first, then connect your phone to the drone’s Wi-Fi for camera view only.
How do I replace a rotor?
Remove the retaining screw with the included screwdriver, pull off the rotor, then install the correct replacement (A or B type).
How do I pair the remote and calibrate the drone?
Copy and paste this link into your browser to video an instructional video: https://youtu.be/uygiMoZ1acQ
